» » »

Sewing Tips and Tricks Omaha NE

Is there a trick to sewing bias tape around curves without it twisting and cupping? What kind of lining should I use in a silk suit? Which presser foot should I use to attach beads? Read on to find the answers to questions like these.

Mangelsens David M
(402) 391-6225
3457 S 84th St
Omaha, NE
 
Crafts On Wheels
(402) 455-3286
2508 N 72nd St
Omaha, NE
 
Art F/X
(402) 330-4488
3628 S144th St
Omaha, NE
 
Antiques & Fine Art
(402) 341-9942
309 S 16th St
Omaha, NE
 
B & C Art Frame
(402) 330-7818
3636 S 138th St
Omaha, NE
 
Jo-Ann Fabric and Craft Store
(402) 397-1565
8447 W Center Rd
Omaha, NE
 
Nebraska Art Statuary Inc
(402) 342-4232
2201 Poppleton Ave
Omaha, NE
 
Michaels
(402) 334-8488
12951 W Center Rd Montclair Shopping Ctr
Omaha, NE
 
Art Images
(402) 496-9988
11015 Elm St
Omaha, NE
 
Art Mart Eagle Run
(402) 963-9885
3639 N 129th St
Omaha, NE
 

Sewing Tips and Tricks

Linda Lee, our Q&A expert, welcomes your questions. Direct your e-mails to her at sewnews@sewnews.com.

Bias Opinion

Is there a trick to sewing bias tape around curves without it twisting and cupping?

Audrey

There are some very fancy bias binder attachments available for most machines. These attach and stitch bias tape to an edge in one step, but there's a better way that doesn't require any special equipment. For the best finished look, choose a double or French bias tape or cut your own bias pieces to customize the color and vary the size.

Cut bias strips six times your preferred finished width, plus an additional 1/8∗-1/4∗ depending on the fabric thickness. The thicker the fabric, the more you should add to the width. Fold the strip in half lengthwise before applying it to the edge. Pin the raw binding edges to the project raw edge. As you're working around the curve, give the binding a little shove, easing as much fullness into the application as you can without creating puckers. This will keep the binding flat when finished.

Stitch the binding to the project along the seamline. Trim the seam allowance to an even width that's slightly narrower than the finished binding width. Wrap the binding around the raw edges, keeping it as snug as possible against the edge. The outer folded edge should lie beyond the seamline on the project wrong side. Pin frequently in the seam well, parallel to the outer edge. Stitch in the ditch from the right side so that the stitches are both hidden in the seam well and catching the folded edge on the fabric wrong side.

Suited for Silk

What kind of lining should I use in a silk suit?

Carolyn

The best all-purpose lining for most projects and fabrics is Bemberg rayon. You can find this in most independent fabric stores or online. It's lightweight but durable. I also recommend using China silk for a very lightweight lining, although it's less durable and can shred at stress points over time. Avoid using polyester lining in a silk garment. It's too stiff and doesn't conform to the characteristics of a nice silk.

Ruffle Trouble

I'm covering seat cushions for my kitchen chairs. How do I calculate the amount of fabric needed for a ruffle around each cushion?

Michael

First, decide whether you want a single-layer ruffle that's hemmed on one edge or if you want a ruffled that's folded in half, so the fabric right side is visible on both sides. Either way, measure the circumference of the seam cushion. Multiply that measurement by at least two and add a few inches. Most ruffles are double the fullness. Next, calculate the desired width of the ruffle and decide whether the ruffle will be single or double-sided. Cut enough strips to stitch together and form one long piece.

For the Beads

Which presser foot should I use to attach beads?

Anonymous

Look for a presser foot that has a scooped out tunnel on the foot bottom that's large enough to travel over the beads. Manufactu...

Click here to read the rest of the article from Sew News

© Creative Crafts Group, LLC. All rights reserved.