Sewing Techniques and Tips Westland MI
Consign and Design Decorating Solutions
6517 N. Canton Center Road
Focal Point Studio Of Photography
33431 Grand River Ave
Simon House Inc
16865 Lamphere St
31596 Grand River Ave
Nest to Nest Home Consignment Shoppe
154 Mary Alexander Court
24081 Research Dr
33321 Grand River Ave
33350 W 9 Mile Rd
22042 Farmington Rd
Sewing Techniques and Tips
Sew It Seams
If you’re sewing a garment that has many seams, make the seam styling stand out by inserting piping without filler between each seam. This treatment is preferable over regular piping in curved princess seams since it lies flat.
Cut 2”-wide strips the length of the seam from contrasting or coordinating fabric. Cut on the bias for curvy seams and either on the bias or crossgrain for straight seams. Press the long strip in half lengthwise with wrong sides together.
Position the strip on the fabric right side with the strip raw edges even with the cut edge of one seam allowance. Place the opposite side of the seam over the first with right sides facing and sandwiching the strip. Keep all raw edges aligned; pin in place.
Sew a 5⁄8” seam. A G” contrasting strip will appear between the seam on the fabric right side.
To keep your jeans and T-shirts looking new, always turn the garments inside out when you put them in the washing machine and dryer.
When preshrinking a knit, prevent it from stretching out of shape by basting together the selvages.
Keep black garments looking black by never putting them in the dryer. Let them hang to dry instead.
Become familiar with different weights and drapes in knits. A double knit works best in pants and close-fitting skirts since it won’t stretch out of shape. But the same double knit will be too heavy for a top. A thin drapey knit works well for a top or a wrap dress, but is too wimpy for pants and will make them look like pajamas.
Don’t be afraid to sew with genuine leather and suede on your sewing machine.
- Use a 90/14 NTW needle for mediumweight skins and a 70/10 HJ needle for lightweight skins.
- Use a Teflon presser foot to prevent the skins from stretching as you sew.
- Use 100% polyester thread. Any other thread will rot from the tannins in the leather.
- Pins will merely bend if you try to pin leather or suede pieces, so hold seams together with paper clips.
- Lengthen the stitch to 3.0 mm.
- You can use fusible interfacing, but never press using steam. Use a dry iron and a brown paper bag as a presscloth.
Done With Ease
When cutting fitted garments on the crossgrain or from fabric with no give, add extra ease to the back.
Cut apart the back pattern piece from shoulder to hemline (not into the neckline). Split the pattern apart and add H” all the way from the shoulder to the hemline.
Since the back shoulder is now H” wider than the front, run an easeline on the back when working with soft fabrics.
Add a 1⁄2” dart when working with firmer fabrics. Position the dart in the middle of the shoulder and make it 3H” long.
Why use a rotary cutter? It’s more accurate, especially when cutting through tissue paper on slippery or unstable fabrics. The blades may dull, but that’s a small price to pay for accuracy without hassle. One piece of advice: Pur...
Click here to read the rest of the article from Sew News