Joining Elastic Ends and Pillow Making Nokomis FL

I’ve been having lots of trouble joining elastic ends. Even when I use a ballpoint needle, the elastic still bunches What am I doing wrong? Please feel free to read the following article to find out the answer of this question.

Brum Art Glass Inc
(941) 921-5265
4099 S Tamiami Trl
Sarasota, FL
 
Ann's Custom Framing & Art Gallery
(941) 923-3704
2178 Gulf Gate Dr
Sarasota, FL
 
Glass Crafters Stained Glass
(941) 379-8333
398 Interstate Ct
Sarasota, FL
 
Art & Frame of Sarasota
(941) 366-2301
1055 S Tamiami Trl Ste 102
Sarasota, FL
 
Blue Line Inc
(941) 366-5300
301 Central Ave
Sarasota, FL
 
Collector's Wall Of Fine Art Galleries (The)
(941) 927-2643
4976 Tamiami Trl
Sarasota, FL
 
Art Craft Upholstering
(941) 922-8008
4023 Sawyer Rd Unit 100
Sarasota, FL
 
Wall Art
(941) 388-0140
12 N Blvd Of Presidents
Sarasota, FL
 
Benjamin Moore Paints
(941) 955-7004
2031 12th St
Sarasota, FL
 
Studio One Art Collection
(941) 358-4922
4367 Independence Ct
Sarasota, FL
 

Joining Elastic Ends and Pillow Making

Linda Lee is the owner of The Sewing Workshop Pattern Collection, a group of patterns for distinctive garments using innovative sewing techniques. As a licensed interior designer and member of ASID since 1974, Linda has written 13 books.Visit sewingworkshop.com for more information.

Making Ends Meet
I’ve been having lots of trouble joining elastic ends. Even when I use a ballpoint needle, the elastic still bunches What am I doing wrong?
Claire H

This is an all-too-common problem no matter what needle or thread is used. So I've abandoned the technique of overlapping elastic ends and trying to sew them together. Instead, it works well to abut the elastic ends and straddle the connection with a small piece of fabric. Not only does this technique eliminate bunching, it's also less bulky and there's no longer a ridge in the back of the waistband.

Cut a scrap of muslin or other flat woven fabric that’s about 1" long and slightly wider than the elastic.

After threading the elastic through the casing, abut the elastic ends. Position the fabric scrap under the abutted ends. Zigzag each end to the fabric (1).

Straight & Narrow

What's the best way to make a narrow hem on chiffon?
J. Craig

Stitching a narrow hem, also called a baby hem, in chiffon is tricky but worth the effort.

Of course, there are presser feet that will automatically help you create a narrow hem. These feet are shaped to feed the fabric into a roll as it's stitched. They’re available in a choice of hem widths from extremely tiny to the widest of about ¼". While these feet are certainly worth trying, I've found them to be a little troublesome to use and they sometimes produce an inconsistent hem width. I prefer to start from scratch.

Determine the finished garment length. Mark a line using chalk, or better yet, thread-baste the line since chalk sometimes rubs off too easily from sheer fabrics.

Stabilize the fabric by staystitching through a single layer along the marked line (2).

Fold the fabric to the wrong side along the staystitching line. This line of stitching makes it easy to fold the fabric, so don’t eliminate this step.

Using an edgestitch presser foot, position the machine needle close to the fold. Stitch along the fold. Trim the hem allowance next to the stitching line using small trimming scissors. This is delicate work, so be careful not to cut the outer fabric (3).

Fold the fabric again, trying not to exceed a total fold width of ⅛". Stitch along this folded edge to create a second stitching line (4). On the garment right side, you’ll see only one stitching line.

Weight Gain

What’s the best way to get a 100% cotton fabric to feel like a heavyweight decorator fabric to use for pillows?
Helen M.

Assuming you want to retain a soft look to the fabric since you’re making pillows, I recommend that you underline the fabric with a high quality cotton ...

Click here to read the rest of the article from Sew News

© Creative Crafts Group, LLC. All rights reserved.