Couture Zipper Setting Technique Lake Charles LA

There are dozens of ways to set a zipper into a fly placket, but this couture method delivers excellent results. I first discovered this application on a pair of Yves Saint Laurent pants, and you'll find that it belies any notion that couture techniques are difficult. Please feel free to read the following article to find more information on sewing tips.

Floral Supply Inc
(337) 439-2366
1226 2nd St
Lake Charles, LA
 
Garden District Glass
(337) 433-5133
1205 Kirkman St
Lake Charles, LA
 
Bridgepointe Custom Framing
(337) 217-3100
3403 Ernest St
Lake Charles, LA
 
Betsy's Frames By Design LLC
(337) 474-8191
4423 1/2 Lake St
Lake Charles, LA
 
Michaels Arts & Crafts
(337) 562-2320
3425 Derek Dr
Lake Charles, LA
 
Hancock Fabrics
(337) 436-4657
2300 Ryan St
Lake Charles, LA
 
Woven Heart
(337) 480-9801
3311 Ernest St
Lake Charles, LA
 
Frameworks Greg David's
(337) 474-7717
4800 Nelson Rd
Lake Charles, LA
 
Cuccio's Ceramics & Gifts
(337) 479-1434
3415 Louisiana Ave
Lake Charles, LA
 
Central Stamp & Sign Co LLC
(337) 562-0303
624 Romero St
Lake Charles, LA
 

Couture Zipper Setting Technique

How To
Couture With Claire

Sew Professional
with Claire Shaeffer

There are dozens of ways to set a zipper into a fly placket, but this couture method delivers excellent results. I first discovered this application on a pair of Yves Saint Laurent pants, and you'll find that it belies any notion that couture techniques are difficult.

The Fly Zipper
In this couture method, the fly opening is machine stitched first. Then the zipper is sewn into the opening by hand. This procedure allows you to set the zipper into any type of opening (slot, lapped, bound or fly) with the control that hand sewing permits, but without sacrificing the integrity of the design. The stitching also reinforces the edges and holds the layers flat. In couture, fly plackets are usually finished with extended facings that are cut as a part of the front, instead of with a separate facing like men's trousers. The result is more flattering and less bulky.

Prepare the Placket
Mark the foldlines on the overlap and underlap pieces at the zipper opening with long hand-basting stitches.

If the opening has an interfacing pattern, fuse or sew the interfacing fly piece to the fly extensions on the fabric wrong side (1). If the pattern doesn't have an interfacing pattern, create one by tracing the fly extension section that will be folded to the fabric wrong side.

Cut a 1Ú2"-wide fabric strip from lightweight silk to create a stay for the fly opening of each pant piece. The stay length should be approximately that of the pattern fly opening. Moisten and press the strip to remove the fabric stretch.

Position the stays over the marked foldlines on the fabric wrong side of each pant front piece. Pin the stay ends in place; then pin toward the stay center, easing the pant fabric as needed. Use a long running stitch to sew the stay in place (2).

Stitch the pant front pieces together at the center front, beginning at the zipper opening lower edge and ending about 2" from the pant inseams (3).

Fold under the seam allowances on both sides of the placket; baste G" from the folded edge beginning at the opening lower edge. Baste the waist edge. Press the folded edges.

Prepare the Zipper
Press the zipper tape to remove any folds. If the zipper is longer than the opening, measure beginning at the upper edge and mark the finished length. At the marked length, stitch a thread bar over the zipper teeth.

Cut off the zipper H" to 1" below the thread bar.

Overcast-stitch or bind the zipper lower edge.

Set the Zipper
On the right pant front (overlap) piece, mark the fly stitching line using thread tracing or chalk. With the fabric right side up, stitch along the marked line, ending at the crotch seamline (4). Pull the threads through to the wrong side using a calyx-eyed needle. Knot and trim the thread ends.

On the left pant front (underlap), stitch close to the folded edge, keepin...

Click here to read the rest of the article from Sew News

© Creative Crafts Group, LLC. All rights reserved.