Couture Zipper Setting Technique Bonita Springs FL

There are dozens of ways to set a zipper into a fly placket, but this couture method delivers excellent results. I first discovered this application on a pair of Yves Saint Laurent pants, and you'll find that it belies any notion that couture techniques are difficult. Please feel free to read the following article to find more information on sewing tips.

Michael's Arts & Crafts
(239) 593-5640
2253 Pine Ridge Road
Naples, FL
Customer Rating
Customer Rating

Customer Review
Company Rating (on scale of 1 to 5) = 4(1 person reviewed this company)
  • Variety of Products 4
  • Pricing 4
  • Helpfulness of Staff 4


Its All Good Consignment Boutique
(239) 839-8632
1224 SE 47th Street
Cape Coral, FL
 
Home Fashion Upholstery
(239) 597-7783
5309 Shirley St
Naples, FL
 
American Paint Supplies Inc
(239) 566-2700
5400 Taylor Rd Ste 107
Naples, FL
 
Dimensions Design Studio Inc
(239) 435-9992
4444 Tamiami Trl N Ste 1
Naples, FL
 
Michael's Arts & Crafts
(239) 274-5509
5001 South Cleveland Avenue
Fort Myers, FL
Customer Rating
Customer Rating

Customer Review
Company Rating (on scale of 1 to 5) = 3.5(1 person reviewed this company)
  • Variety of Products 5
  • Pricing 2
  • Helpfulness of Staff 4


Art & Frame
(239) 591-4783
5760 Shirley St Ste 11
Naples, FL
 
Art E Fact
(239) 597-7660
2110 Sevilla Way
Naples, FL
 
Art & Glass Works Inc
(239) 481-2900
15701 S Pebble Ln
Fort Myers, FL
 
A-Z Framing Designs Inc
(239) 936-2222
17230 S Tamiami Trl
Fort Myers, FL
 

Couture Zipper Setting Technique

How To
Couture With Claire

Sew Professional
with Claire Shaeffer

There are dozens of ways to set a zipper into a fly placket, but this couture method delivers excellent results. I first discovered this application on a pair of Yves Saint Laurent pants, and you'll find that it belies any notion that couture techniques are difficult.

The Fly Zipper
In this couture method, the fly opening is machine stitched first. Then the zipper is sewn into the opening by hand. This procedure allows you to set the zipper into any type of opening (slot, lapped, bound or fly) with the control that hand sewing permits, but without sacrificing the integrity of the design. The stitching also reinforces the edges and holds the layers flat. In couture, fly plackets are usually finished with extended facings that are cut as a part of the front, instead of with a separate facing like men's trousers. The result is more flattering and less bulky.

Prepare the Placket
Mark the foldlines on the overlap and underlap pieces at the zipper opening with long hand-basting stitches.

If the opening has an interfacing pattern, fuse or sew the interfacing fly piece to the fly extensions on the fabric wrong side (1). If the pattern doesn't have an interfacing pattern, create one by tracing the fly extension section that will be folded to the fabric wrong side.

Cut a 1Ú2"-wide fabric strip from lightweight silk to create a stay for the fly opening of each pant piece. The stay length should be approximately that of the pattern fly opening. Moisten and press the strip to remove the fabric stretch.

Position the stays over the marked foldlines on the fabric wrong side of each pant front piece. Pin the stay ends in place; then pin toward the stay center, easing the pant fabric as needed. Use a long running stitch to sew the stay in place (2).

Stitch the pant front pieces together at the center front, beginning at the zipper opening lower edge and ending about 2" from the pant inseams (3).

Fold under the seam allowances on both sides of the placket; baste G" from the folded edge beginning at the opening lower edge. Baste the waist edge. Press the folded edges.

Prepare the Zipper
Press the zipper tape to remove any folds. If the zipper is longer than the opening, measure beginning at the upper edge and mark the finished length. At the marked length, stitch a thread bar over the zipper teeth.

Cut off the zipper H" to 1" below the thread bar.

Overcast-stitch or bind the zipper lower edge.

Set the Zipper
On the right pant front (overlap) piece, mark the fly stitching line using thread tracing or chalk. With the fabric right side up, stitch along the marked line, ending at the crotch seamline (4). Pull the threads through to the wrong side using a calyx-eyed needle. Knot and trim the thread ends.

On the left pant front (underlap), stitch close to the folded edge, keepin...

Click here to read the rest of the article from Sew News

© Creative Crafts Group, LLC. All rights reserved.